Evalue Technology ECM-3610 - Windows NT 4.0 Display Installation

ECM-3610/3610L
ECM-3610/3610L User’s Manual 107
5.2.2 Windows NT 4.0 Display Installation
A display driver for Windows NT 4.0 is supplied with the system on the supporting CD-
ROM.
The driver installation may be performed by following steps shown below:
1. Start the control panel by clicking the ‘Start’ button, click ‘Settings’ and ‘Control Panel’
from the sub-menu. Double click the ‘Display’ icon in the control panel as shown below.
2. On the Display properties window, click the ‘Settings’ tab as shown below.