User’s Manual
16 ECM-3610/3610L User’s Manual
3.3 Installing DRAM (SODIMMs)
3.3.1 System Memory
The reverse side of the ECM-3610 contains a socket for 144-pin dual inline memory
module (SODIMM). The socket uses 3.3 V unbuffered synchronous DRAM (SDRAM).
SODIMM module is available in capacities of 32, 64, 128, 128 or 512 MB. The socket can
be filled in the SODIMM of any size, giving your ECM-3610 single board between 32 and
512 MB of memory.
3.3.2 Memory Installation Procedures
Press the SODIMM module right down into the socket, until you hear a click. This is when
the two handles have automatically locked the memory module into the correct position of
the SODIMM socket. (See Figure below) To take away the memory module, just push both
handles outward, and the memory module will be ejected by the mechanism in the socket.
To Next Page
Loading...