Evalue Technology ECM-3610 - Standard CMOS Setup Options; Main Menu Selections Explained

User’s Manual
52 ECM-3610/3610L User’s Manual
4.5.2.1 Main Manu Selection
This table shows the selections that you can make on the Main Menu.
Item Options Description
Date Month DD YYYY Set the system date. Note that the
‘Day’ automatically changes when
you set the date
Time HH : MM : SS Set the system time
IDE Primary Master Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub menu
of detailed options
IDE Primary Slave Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub menu
of detailed options
IDE Secondary Master Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub menu
of detailed options
IDE Secondary Master Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub menu
of detailed options
Drive A
Drive B
None
360K, 5.25 in
1.2M, 5.25 in
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
Select the type of floppy disk drive
installed in your system
Video EGA/VGA
CGA 40
CGA 80
MONO
Select the default video device
Halt On All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key
Select the situation in which you
want the BIOS to stop the POST
process and notify you
Base Memory N/A Displays the amount of conventional
memory detected during boot up
Extended Memory N/A Displays the amount of extended
memory detected during boot up
Total Memory N/A Displays the total memory available
in the system
Table 2 : Main Menu Selections