Evalue Technology ECM-3610 - Parallel Port and Audio Configuration; Parallel Port Mode and ECP;EPP Settings; Legacy Audio and Sound Blaster Settings

User’s Manual
64 ECM-3610/3610L User’s Manual
4.5.5.12 TX, RX Inverting Enable
This item allows you to determine the active of RxD, TxD level.
The Choice: Yes, No No, Yes No, No Yes, Yes
4.5.5.13 Onboard Parallel Port
Select a logical LPT port name and matching address for the physical parallel (printer)
port.
The choice: 378H/IRQ7, 278H/IRQ5, 3BCH/IRQ7, Floppy, Disabled.
4.5.5.14 Onboard Parallel Mode
Select an operating mode for the onboard parallel port. Select Compatible or Extended
unless you are certain both your hardware and software support EPP or ECP mode.
The choice: EPP, ECP, ECP/EPP, Normal,
4.5.5.15 ECP Mode Use DMA
Select a DMA channel for the port.
The choice: 3, 1.
4.5.5.16 Parallel Port EPP Type
Select EPP port type 1.7 or 1.9.
The choice: EPP1.7, EPP1.9.
4.5.5.17 Onboard Legacy Audio
This item allows you to enable or disable the onboard legacy audio function.
The choice: Enable, Disable.
4.5.5.18 Sound Blaster
This item allows you to enable or disable the onboard audio function is compatible with
sound blaster mode.
The choice: Enable, Disable.
4.5.5.19 SB I/O Base Address
This chipset traps I/O accesses for Sound Blaster compatibility at 220H, 240H, 260H, or
280H.
The choice: 220H, 240H, 260H, 280H.