Evalue Technology ECM-3610 - Resource Allocation and Assignment; IRQ Resource Assignments; DMA Resource Assignments; PCI;VGA Snoop and IRQ Assignment

User’s Manual
70 ECM-3610/3610L User’s Manual
4.5.7.4 IRQ Resources
When resources are controlled manually, assign each system interrupt a type, depending
on the type of device using the interrupt.
4.5.7.5 IRQ3/4/5/7/9/10/11/12/14/15 Assigned to
This item allows you to determine the IRQ assigned to the ISA bus and is not available to
any PCI slot. Legacy ISA for devices compliant with the original PC AT bus specification,
PCI/ISA PnP for devices compliant with the Plug and Play standard whether designed for
PCI or ISA bus architecture.
The Choice: Legacy ISA and PCI/ISA PnP.
4.5.7.6 DMA Resources
When resources are controlled manually, assign each system DMA channel a type,
depending on the type of device using the DMA channel.
4.5.7.7 DMA 0/1/3/5/6/7 Assigned to
Legacy ISA for devices compliant with the original PC AT bus specification, PCI/ISA PnP
for devices compliant with the Plug and Play standard whether designed for PCI or ISA
bus architecture.
Choices are Legacy ISA and PCI/ISA PnP.
4.5.7.8 PCI / VGA Palette Snoop
Leave this field at Disabled.
Choices are Enabled, Disabled.
4.5.7.9 Assign IRQ for VGA
This item allows you to Enable or Disable assign an IRQ for onboard VGA controller.
The Choices : Enabled, Disabled.
4.5.7.10 Assign IRQ for USB
This item allows you to Enable or Disable assign an IRQ for onboard USB Controller.
The Choices : Enabled, Disabled.