Maintenance
114 FIP-400B
Recharging the Battery of the Multifiber Source
Recharging the Battery of the Multifiber
Source
The MFS operates with the following power sources:
Indoor use only: USB power adapter connected to a power outlet.
OR
USB cable connected to a standard USB port on a computer.
Indoor and outdoor use: Rechargeable Li-ion polymer battery. The
charge status is shown with the LED on the MFS. See Multifiber Source
LED Indicators on page 10 for details.
To recharge the battery of the MFS:
1. Connect the USB cable to the USB port located at the top of the unit.
2. Connect the other end of the USB cable to the USB power adapter, and
then connect the adapter to a power outlet.
OR
Connect the other end of the USB cable to the USB port of your
computer.
To Next Page
Loading...
