Inspecting Fiber Ends
Fiber Inspection Probe 99
Updating the Firmware
Updating the Firmware
The FIP-400B is designed to provide firmware updates whenever
necessary. This allows you to benefit from the updates of your unit each
time you use it. The firmware updates can be recommended or required.
To notify you, a message box appears each time a firmware update is
recommended or required.
In the case of a recommended firmware update, you can perform the
update directly via Wi-Fi with your smart device.
For required firmware updates, you need to contact the technical
support team.
Once an update is started, follow the indications to complete the process.
To perform a recommended or required firmware update:
When the application prompts you, follow the instructions on-screen.
Note: The application returns in live video mode as soon as the update is
performed.
CAUTION
Do not disconnect the probe or turn off the unit when an update is
in progress.
To Next Page
Loading...
