Introducing the FIP-400B Fiber Inspection Probe and ConnectorMax2 Mobile
12 FIP-400B
ConnectorMax2 Mobile Software
ConnectorMax2 Mobile Software
ConnectorMax2 Mobile is the application used to view the fiber
inspections. You can also use specific test configurations and analyze the
fibers automatically upon capturing a picture.
Note: If you have an FIP-415B, you can activate the auto analysis option if you
have purchased it from EXFO.
Battery status
Name of the file resulting
from the autonaming
User preferences
Can be found in
the menu button
depending on the
smart device used.
Focus indicator
To disconnect the probe
To m ake a capture
To customize the
capture
parameters
To Next Page
Loading...
