Introducing the FIP-400B Fiber Inspection Probe and ConnectorMax2 Mobile
Fiber Inspection Probe 11
Using Your Unit with TestFlow
Using Your Unit with TestFlow
You can use this product for your test jobs in the TestFlow application. For
more information about using TestFlow or other instruments as part of your
tests, refer to the corresponding user documentation.
Note: Some of the features for your product are not available while in TestFlow
mode.
Power LED Meaning
Green Power is on.
Flashing red
MFS internal temperature is too high.
Battery level is critical.
Red Battery level is too low.
Not lit Power is off.
Battery LED Meaning
Slow-flashing blue Battery level is low.
Fast-flashing blue Battery is charging.
Blue Battery is fully charged.
To Next Page
Loading...
