Fiber Inspection Probe 23
3 Setting up Your Fiber
Inspection Probe and
ConnectorMax2 Mobile
When you receive your wireless probe, and before you start working, you
need to download the ConnectorMax2 Mobile application on your smart
device.
You can change several settings in ConnectorMax2 Mobile, such as the
automated file name. These settings are kept for future work sessions.
Preparing to Use the Mobile Application
Before you start working with your wireless probe, there are two steps to
perform.
You need to install ConnectorMax2 Mobile on your smart device.
Once the application is installed, you have to connect your wireless
probe by Wi-Fi.
Note: You need to have access to an external Wi-Fi network to install
ConnectorMax2 Mobile. The Wi-Fi needs to be set to ON on your smart
device.
IMPORTANT
The ConnectorMax2 Mobile application is available for free in
Google Play Store. You need to have a Google account to download
the application. For more information, refer to www.google.com.
To Next Page
Loading...