Introducing the FIP-400B Fiber Inspection Probe and ConnectorMax2 Mobile
Fiber Inspection Probe 9
Probe LED Indicators
Status LED Meaning
Flashing blue Processing data.
Flashing red
There is a problem with the probe. Follow the
instructions on screen.
The auto focus operation has timed out.
There is an analysis error.
Blue The probe is ready and operational.
Red When the probe is connected, indicates that the
status of the displayed measurement is Fail.
Note: Indicates the status of the file selected
in the Measurements window.
Green When the probe is connected, indicates that the
status of the displayed measurement is Pass.
Note: Indicates the status of the file selected
in the Measurements window.
Battery LED Meaning
Flashing blue USB connected, battery charging.
Blue USB connected, battery fully charged.
Red Battery error (only visible when connected to a USB
cable).
Flashing yellow USB connected, battery not charging because its
temperature does not allow the charging process.
Yellow USB not connected, battery level is critical.
Not lit USB not connected, battery above low level.
To Next Page
Loading...
