EXFO MaxTester 700 - Managing Trace Files from the OTDR Test Application; Saving a Trace in a Different Format

MAX-700 181
11 Managing Trace Files from the
OTDR Test Application
Once you have acquired traces, or when you want to work with them after
an acquisition, you will need to save, open, rename, and delete trace files.
You can save and open trace files from the OTDR test application. To
rename, copy, move, and delete trace files, you must use the File Manager
utility.
Saving a Trace in a Different Format
With the OTDR application, you can save traces in native (.trc) and
Bellcore (.sor) formats. By default, the application saves the traces in
native (.trc) format. For information on how to define the default file
format, see Selecting the Default File Format on page 95).
To save an OTDR trace file in another format:
Use a computer onto which EXFO FastReporter is already installed.