Working with Your Unit
MAX-700 239
Taking Screen Captures
To take only one screen capture:
From the unit's keypad, press the button and hold it down for
about 3 seconds.
The screen capture is automatically taken as soon as you release the
button (a sound and visual effect typical of a camera taking a picture
indicate that the capture is complete).
Note: If a keyboard is connected to your unit, you can also press the
PRINT SCREEN key.
To take several screen captures:
1. From the unit's keypad, press the button.
2. Once the on-screen keyboard is displayed, tap the button.
3. From the floating toolbar, tap the button.
The screen capture is automatically taken (a sound and visual effect typical
of a camera taking a picture indicate that the capture is complete).
To Next Page
Loading...
