Using the optional Switch Port Speed License, these ports can be upgraded to unrestricted 100-
gigabit mode in groups of six ports per license. Up to four Switch Port Speed Licenses can be
applied for each X870-96x-8c switch.
• RJ45 Ethernet management port.
• USB port for access to external storage.
• USB console port.
• RJ45 RS-232c serial console port used to connect a terminal and perform local management.
• LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see ExtremeSwitching X870 Series Switch LEDs on page 116.
Figure 113: ExtremeSwitching X870-96x-8c Front Panel
1 = Precision Timing ports (not supported)
4 = QSFP28/QSFP+ Ethernet ports
2 = Storage port: micro USB A 5 = Console port: RJ45
3 = Console port: micro USB B 6 = Ethernet management port: RJ45
The rear panel of the ExtremeSwitching X870-96x-8c switch includes:
• Six replaceable fan modules.
• Two power supply bays for either AC or DC power supplies.
Figure 114: ExtremeSwitching X870-96x-8c Rear Panel
1 = Grounding lug
3 = AC power supplies
2 = Fan modules
ExtremeSwitching X870 Series Switch LEDs
The following sections describe the meanings of the LEDs on the ExtremeSwitching X870 series
switches.
ExtremeSwitching X870 Series Switch LEDs
ExtremeSwitching Switches
116 ExtremeSwitching Hardware Installation Guide
To Next Page
Loading...
Need help?
General
