Scaling and Performance
For scaling and performance specifications, refer to the product data sheet.
Safety Standards
Table 206: Safety Standards
North American ITE UL 60950-1 2nd Ed., Listed Device (US)
CSA 22.2 #60950-1-03 2nd Ed.(Canada)
Complies with FCC 21CFR 1040.10 (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
European ITE EN 60950-1:2007 2nd Ed.
EN 60825-1+A2:2001 (Lasers Safety)
2014/35/EU Low Voltage Directive
International ITE CB Report & Certificate per IEC 60950-1 2nd Ed. + National
Dierences
AS/NZX 60950-1 (Australia /New Zealand)
EMI/EMC Standards
Table 207: EMI/EMC Standards
North America EMC for ITE FCC CFR 47 part 15 Class A (USA)
ICES-003 Class A (Canada)
European EMC standards EN 55022:2006+A1:2007 Class A
EN 55024:A2-2003 Class A includes IEC 61000-4-2, 3, 4, 5, 6, 11
EN 61000-3-2,8-2006 (Harmonics)
EN 61000-3-3:2008 (Flicker)
ETSI EN 300 386 v1.4.1, 2008-04 (EMC Telecommunications)
2014/30/EUC EMC Directive
International EMC certifications CISPR 22: 2006 Ed 5.2, Class A (International Emissions)
CISPR 24:A2:2003 Class A (International Immunity)
IEC 61000-4-2:2008/EN 61000-4-2:2009 Electrostatic
Discharge, 8kV Contact, 15 kV Air, Criteria A
IEC 61000-4-3:2008/EN 61000-4-3:2006+A1:2008 Radiated
Immunity 10V/m, Criteria A
IEC 61000-4-4:2004 am1 ed.2./EN 61000-4-4:2004/A1:2010
Transient Burst, 1 kV, Criteria A
IEC 61000-4-5:2005 /EN 61000-4-5:2006 Surge, 2 kV L-L, 2 kV
L-G, Level 3, Criteria A
IEC 61000-4-6:2008/EN 61000-4-6:2009 Conducted Immunity,
0.15-80 MHz, 10V/m unmod. RMS, Criteria A
IEC/EN 61000-4-11:2004 Power Dips & Interruptions, >30%, 25
periods, Criteria C
Country-specific VCCI Class A (Japan Emissions)
ACMA RCM (Australia Emissions)
CCC Mark
KCC Mark, EMC Approval (Korea)
Scaling and Performance Technical Specifications
424 ExtremeSwitching Hardware Installation Guide
To Next Page
Loading...
Need help?
General
