V300 Virtual Port Extender LEDs
The V300 Virtual Port Extender front panel LEDs observe the following behavior:
Table 60: V300 Virtual Port Extender LEDs
Location LED Indicative Color Status Description
LED Per device PWR LED (Top) Green O Power o
Solid Power on
Amber Solid External PSU 2 fail (For non-PD model)
Flash External PSU 1 fail (For non-PD model)
System LED (Bottom) Green O System o
Solid System on and ready
Flash Booting
Amber Flash Fail (Controlled by MPP)
LED Per RJ45
Port 1-8 (PSE)
Link/Act (left) Green O No Link
Solid Link is established
Flash Link activity
PoE (right) Amber O No PD detected
Solid PD is detected
LED Per RJ45
Port 9-10 (PD)
Link/Act (left) Green O No link
Solid Link is established
Flash Link activity
PoE (right)
PoE model
Amber O No PSE power is provided
Solid PSE power is supplied
V400 Virtual Port Extender
Bridge port extenders (BPEs) are devices that do not fully process packets, nor make forwarding or
filtering decisions. Instead, they simply receive packets from extended ports and forward packets
toward the upstream controlling bridge (an ExtremeXOS-based switch) for L2/L3 processing. This
scheme, based on the IEEE 802.1BR specification, is known as extended edge switching.
The V400 Virtual Port Extender oers the following features:
• 24 or 48 10/100/1000 Base-T ports that provide 10 Gbps copper connectivity.
• Two or four 1000/10G Base-X SFP+ ports that provide 10 Gbps high-density
fiber connectivity.
• Serial console port.
• Front panel USB port.
• PoE+ power on some models.
• Fixed internal power-supply and fan modules.
All models include either two or four SFP+ ports on the faceplate of each base unit, which can be
provisioned either as uplink or cascade ports. This gives administrators the option to create redundant
V300 Virtual Port Extender LEDs
Expansion Modules
146 ExtremeSwitching Hardware Installation Guide
To Next Page
Loading...
Need help?
General
