FARGO electronics HDP5000 single-side User Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
5-33
Troubleshooting with the Printer Error Message Table (continued)
Printer Error
Message
Cause Solution
No Laminator Film
Installed
No laminator Film is
installed in the laminator
unit.
Ensure that the appropriate
Laminator Film is installed.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Wrong Laminator
Film Installed
An incorrect laminator film
has been installed, or a
driver setting is incorrect.
Ensure that the appropriate
Laminator Film is installed and
press the Resume button located
on the Printer to continue printing.
To cancel, press the Cancel Print
button or the Cancel button located
on the Printer.
Laminator Film Out The Film installed in the
laminator is empty.
The Film installed in the laminator is
empty.

FARGO electronics HDP5000 single-side Specifications

General

Brand	FARGO electronics
Model	HDP5000 single-side
Category	Printer
Language	English