FARGO electronics HDP5000 single-side User Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
6-26
Using the Printer page
You can use the Printer page to review current information about the Printer device settings
and print jobs. Device settings include the following:
• The status which displays information about the current print job.
• The device which displays information about the Printer.
The fields are described below. See the next page to view the entire Printer page.
Field Status Description
Idle Indicates that no print job is active.
Printing Indicates that the job is being sent to the Printer.
printing –
waiting
Indicates that the communication is being slowed by print
operations.
printing –
blocked
Indicates that the communication has been stopped by some
condition.
status
canceled
Indicates that the current job was canceled and is being
rerouted.
online Indicates it is ready to print.
offline
Indicates that the Cover is open or the Printer is not ready to
print.
Printer –
error
Indicates that an error is detected.
device
Busy
Indicates that printing is in progress.
Print
Jobs
This is a display of the current print jobs that have been sent to
the Printer. (Note: The current job that is being received by the
interface is displayed as the active job.)
Cancel a specific print job by selecting the appropriate Cancel
button, which appears when a print job is queued.

FARGO electronics HDP5000 single-side Specifications

General

Brand	FARGO electronics
Model	HDP5000 single-side
Category	Printer
Language	English