FARGO electronics HDP5000 single-side User Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
6-40
Using the Reboot pages
Rebooting the HDP5000 restarts the complete Printer, which includes the Print Server.
Rebooting the Printer
The Reboot page allows the HDP5000 User to reboot or reset the Printer and/or enter the
upgrade mode.
Step Procedure
1 Select the Administration link.
2 Log in as a root User (using the password) if you are so prompted. (Note:
Any change of setting will only be accepted after you have successfully
logged in.)
3 Select the Reboot link.
4 Select the Reboot button.
5 Click Yes when prompted.
6 Wait for the Printer to reboot and display the home page. See the
Reviewing the HDP5000 Home Page
display.

FARGO electronics HDP5000 single-side Specifications

General

Brand	FARGO electronics
Model	HDP5000 single-side
Category	Printer
Language	English