FARGO electronics HDP5000 single-side User Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
9-18
Using the Print Left of Form Option
Follow this instruction.
Step Procedure
1 Use the edge alignment grid (located at the top center of the card) to:
• Adjust the Print LOF up or down by the number (located below the line
located closest to the edge of the card).
2 a. Measure the density square, as shown below.
b. Adjust the image density to 66% ± 1%.

FARGO electronics HDP5000 single-side Specifications

General

Brand	FARGO electronics
Model	HDP5000 single-side
Category	Printer
Language	English