FARGO electronics HDP5000 single-side - Reviewing Information on the Supplies Tab

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
8-103
Reviewing Information on the Supplies tab
Here are the guidelines for automatic positioning on the Supplies tab.
Step Procedure
1 Use this tab to determine the following information (see below):
• Ribbon Level: Type, Reorder Number and Gauge Indicator.
• HDP Film Level: Type, Reorder Number and Gauge Indicator.
• Lamination - Cartridge 1 Level: Type, Reorder Number and Gauge
Indicator. (Note: This is visible only when the Laminate – Cartridge 1
is detected.)
• Lamination – Cartridge 2 Level: Type, Reorder Number and Gauge
Indicator. (Note: This is visible only when the Laminate – Cartridge 2
is detected.)