RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
8-98
Measuring the Total Card area
Step Procedure
1 Determine the area of the card to define. (Note: This area is indicated by the
dashed outline, as shown below. The easiest way to determine the size of
this area is to actually print a card and look at it in the same orientation as
when it exits the Printer.)
2 Measure the total area and enter those dimensions into the dimension boxes.
(Note: The minimum size an area can be is .2 x .2 (5mm x 5mm).)
To Next Page
Loading...
Need help?
General
