FARGO electronics HDP5000 single-side User Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
6-52
Saving addresses
Step Procedure.
1 See the Accessing the Network Setup Menu procedure to access the
Network Settings menu:
Options -> MENU -> Next -> Network Settings
2 Select Next on the LCD to view the Save Addresses menu entry.
3 Press the Select button to save the current network settings (IP address,
GW, SN Mask) as the stored settings which will be used when automatic
address assignment using DHCP is disabled.
Resetting Passwords
Step Procedure
1 See the Accessing the Network Setup Menu procedure to access the
Network Settings menu:
Options -> Menu -> Next -> Network Settings
2 Select Next on the LCD to view the Reset Passwords menu entry.
3 Press the Select button to reset the User passwords to the default settings of
empty strings.
(Note: This can be used when the passwords are not known.)

FARGO electronics HDP5000 single-side Specifications

General

Brand	FARGO electronics
Model	HDP5000 single-side
Category	Printer
Language	English