FARGO electronics HDP5000 single-side - Adjusting the Ribbon Type

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
8-27
Adjusting the Ribbon Type
Use the Ribbon Type dropdown menu to match Ribbon type.
Step Procedure
1 Adjust to match the Ribbon Type selection with the Ribbon type that is
loaded in the Printer.
• YMC (Full Color): Yellow, Magenta, Cyan
OR
YMCK (Full Color/Resin Black): Yellow, Magenta, Cyan, Resin Black
OR
• YMCKK (Full Color/2 Resin Black): Yellow, Magenta, Cyan, Resin
Black, Resin Black
OR
• YMCKH (Full Color/Resin Black/Heat Seal): Yellow, Magenta, Cyan,
Resin Black, and Heat Seal
OR
• YMCFK (Full Color/Resin Black/Fluorescing): Yellow, Magenta, Cyan,
UV Fluorescing, and Resin Black