RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
12-6
Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the
Workbench (continued)
Step Procedure
6 On the Template right click on the Logo box for the options shown below.
7 Select Logo File.
Find the source of the Logo to place on the card. (Note: Fit to Frame will
size the image to fit the box. Once this is set up, this logo will print from the
software program. This is set up in the background.)
To Next Page
Loading...
