RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
12-14
Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the
Application (continued)
Step Procedure
8 Set the ribbon for YMCFK in the Printing Preferences. (Note: The Auto
Detect button may also be used.)
9 Check Dual Pass if you would like to print the F panel on a separate panel of
HDP film from the YMC image. (Note: It is recommended that the user use
the default “Dual Pass” option if the fluorescent image is used in places where
other dye is used or any time the “Invert F panel Image” option is selected)
10 Check Invert F-Panel Image to create a negative of the fluorescent image.
(Note: This may improve the look of the person’s image if used for the Logo.)
To Next Page
Loading...
