Faria SmartCraft MG2000 - Select Display Units - Volume Units

Page 19
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow “>”, press and
hold the “Up” and “Down” buttons together for 2 seconds to save
the selection.
Pressure
Units
BAR
> PSI
The screen returns to the “Select Pressure Units” screen.
Select
Pressure
Units
Press the “Up” or “Down” button
to select another “Display Unit.”
Or press “Mode” to return to the “Edit” mode.
Select Display Units - “Volume Units”
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“Select Display Units” edit function.
Press and hold the
“Up” and “Down” buttons for 2 seconds to
select the “Select Display Units”. Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Select
Display
Units
From the “Select Display Units” function, using the “Up” or “Down”
buttons display the “Select Volume Units” screen.
Press and hold the “Up” and “Down” buttons for 2 seconds to
select “Select Volume Units.”
Select
Volume
Units
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow “>”, press and
hold the “Up” and “Down” buttons together for 2 seconds to save
the selection.
Volume
Units
Liters
> Gal
The screen returns to the “Select Pressure Units” screen.
Select
Volume
Units
Press the “Up” or “Down” button
to select another “Display Unit.”
Or press “Mode”
to return to the “Edit” mode.
All manuals and user guides at all-guides.com