Faria SmartCraft MG2000 - Software Revision; Depth Sounder Warnings - Shallow Warning

Fill the tank before setting this level.
The last line of the display shows the percentage of fuel being sent by
the fuel sender for the full condition.
Press and hold the “Up” and “Down” buttons for 2 seconds to save
the full calibration point.
Fuel
Full
Input Fuel%
XX%
The screen returns to the “Calibrate Fuel Full” screen.
Calibrate
Fuel
Full
Press “Mode” to return to “Edit” mode.
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Fuel
Tank
Calibrate
“Software Revision”
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“Software Revision” edit function.
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
SW ID & Rev.
SmartCraft
PGFXXXX
Date
Depth Sounder Warnings - “Shallow Warning”
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“Depth Sounder Warnings” edit function.
Press and hold the
“Up” and “Down” buttons for 2 seconds to select
the “Depth Sounder Warnings”. Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Depth
Sounder
Warnings
From the “Depth Sounder Warnings” function, using the “Up” or
“Down” buttons display the “Shallow Warning” screen.
Press and hold the “Up” and “Down” buttons for 2 seconds to select
“Shallow Warning.”
Shallow
Warning
Set depth sounder “Shallow Warning.”
Press “Up” or “Down” to set the desired depth sounder “Shallow
Alarm” setting. Line 3 value will adjust.
Shallow
Warning
X.X
Page 26
All manuals and user guides at all-guides.com