Faria SmartCraft MG2000 - Fuel 1 Sensor - Installed; Fuel 2 Sensor - Installed

The screen returns to the “ Paddlewheel Sensor Installed? ” screen.
Press “Up” or “Down” to select another
“Edit” mode edit function.
Otherwise,
Press the
“Mode” button to return to the “Normal” mode.
Paddlewheel
Sensor
Installed?
Fuel 1 Sensor - Installed?
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“ Fuel 1 Sensor Installed? ” edit function.
Press and hold the “Up” and “Down” buttons for 2 seconds to select
the “
Fuel 1 Sensor Installed? ” Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Fuel 1
Sensor
Installed?
This function is used to tell the system whether or not the Fuel 1
Sensor is installed.
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow “>”, Press and
hold the “Up” and “Down” buttons together for 2 seconds to save
the selection.
Fuel 1
Sensor
No
> Yes
The screen returns to the “ Fuel 1 Sensor Installed? ” screen.
Press “Up” or “Down” to select another “Edit” mode edit function.
Otherwise,
Press the
“Mode” button to return to the “Normal” mode.
Fuel 1
Sensor
Installed?
Fuel 2 Sensor - Installed?
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“ Fuel 2 Sensor Installed? ” edit function.
Press and hold the “Up” and “Down” buttons for 2 seconds to select
the “ Fuel 2 Sensor Installed? ” Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Fuel 2
Sensor
Installed?
Page 37
All manuals and user guides at all-guides.com