Faria SmartCraft MG2000 - Select Display Units - Distance Units

Page 20
Select Display Units - “Temperature Units”
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“Select Display Units” edit function.
Press and hold the
“Up” and “Down” buttons for 2 seconds to
select the “Select Display Units”. Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Select
Display
Units
From the “Select Display Units” function, using the “Up” or “Down”
buttons display the “Select Temperature Units” screen.
Press and hold the “Up” and “Down” buttons for 2 seconds to
select “Select Temperature Units.”
Select
Temperature
Units
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow “>”, Press and
hold the “Up” and “Down” buttons together for 2 seconds to save
the selection.
Temperature
Units
° C
> ° F
The screen returns to the “Select Pressure Units” screen.
Select
Temperature
Units
Press the “Up” or “Down” button
to select another “Display Unit.”
Or press “Mode”
to return to the “Edit” mode.
Select Display Units - “Distance Units”
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“Select Display Units” edit function.
Press and hold the
“Up” and “Down” buttons for 2 seconds to
select the “Select Display Units”. Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Select
Display
Units
From the “Select Display Units” function, using the “Up” or “Down”
buttons display the “Select Distance Units” screen.
Press and hold the “Up” and “Down” buttons for 2 seconds to
select “Select Distance Units.”
Select
Distance
Units
All manuals and user guides at all-guides.com
all-guides.com