Faria SmartCraft MG2000 - Select Display Units - Depth Units

Page 21
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow “>”, Press and
hold the “Up” and “Down” buttons together for 2 seconds to save
the selection.
Distance
Units
NM
> Miles
This selection will appear during scrolling. Only two selections are
displayed at a time.
km
The screen returns to the “Select Distance Units” screen.
Select
Distance
Units
Press the “Up” or “Down” button
to select another “Display Unit.”
Or press “Mode”
to return to the “Edit” mode.
Select Display Units - “Depth Units”
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“Select Display Units” edit function.
Press and hold the
“Up” and “Down” buttons for 2 seconds to
select the “Select Display Units”. Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Select
Display
Units
From the “Select Display Units” function, using the “Up” or “Down”
buttons display the “Select Depth Units” screen.
Press and hold the “Up” and “Down” buttons for 2 seconds to
select “Select Depth Units.”
Select
Distance
Units
Press “Up” or “Down” to scroll through the selections.
When the correct choice is next to the selection arrow “>”, Press and
hold the “Up” and “Down” buttons together for 2 seconds to save
the selection.
Depth
Units
Fathoms
> Feet
This selection will appear during scrolling. Only two selections are
displayed at a time.
Meters
The screen returns to the “Select Depth Units” screen.
Select
Depth
Units
Press the “Up” or “Down” button
to select another “Display Unit.”
Or press “Mode”
to return to the “Edit” mode.
All manuals and user guides at all-guides.com