FARO Gage
May 2011
8
Chapter 2: Setup
Packing the FARO Gage
The Gage should be packed very carefully to prevent shipping damage.
1 Pack the Power Supply, Probe Case, and Surface Mount Plate, as shown.
2 Grab the Gage with both hands as shown.
3 Insert the Gage into the case.
Figure 2-1 Pack the Power Module, Probe Case, and Surface Mount Plate
Figure 2-2 Insert Gage into the Case
08M47E00_FAROGage.book Page 8 Wednesday, June 8, 2011 4:12 PM
To Next Page
Loading...
