FARO Gage
May 2011
1
Chapter 1: Introduction
Chapter 1: Introduction
Thank you for choosing FARO’s Portable Measurement Arm - the FARO Gage.
This document contains detailed instructions on how to use your new USB
communication-based/Bluetooth
®
wireless Gage. Additional information about
probes and important guidelines on maintaining your new Gage is also included.
If you have any questions or need further instructions about any procedure,
contact your Customer Service Representative by Phone, Fax or E-Mail. See
“Technical Support” on page 67.
Visit the FARO Customer Care area on the Web at www.faro.com to search our
technical support database. The database is available 24 hours a day, 7 days a
week, and contains hundreds of solutions to product and application questions.
Listed below are some visual and typographical conventions used in each of the
sections.
ALL CAPITAL text Indicates directory names, menu names, buttons,
tabs, key names, acronyms, and modes.
monospaced text Indicates alpha/numeric characters or values you
enter in a field on the screen. For example,
“Type 0.005 for the tolerance setting.”
bold text Anything you must enter exactly as it appears on
your keyboard. For example, to type a:install,
you would see text in bold type exactly as it
should be entered.
S
MALL CAPS text Indicates dialog box, icon names, and window
names.
08M47E00_FAROGage.book Page 1 Wednesday, June 8, 2011 4:12 PM
To Next Page
Loading...
