FARO Gage
May 2011
14
Chapter 2: Setup
Removing the Battery Pack
Slide the battery pack up to remove.
Charging the Battery Pack
Install the battery pack and connect the Gage to a power outlet and the battery
begins charging. Charging automatically stops when the battery pack is
completely charged.
WARNING: Only use the rechargeable battery pack supplied with your Gage.
For information on ordering additional or replacement battery packs, contact
FARO’s Customer Service by Phone, Fax or E-Mail. See “Technical Support”
on page 67.
Figure 2-8 Removing the battery
08M47E00_FAROGage.book Page 14 Wednesday, June 8, 2011 4:12 PM
To Next Page
Loading...
