EXTENDED MODE
CARD G / FIT 60 V 6.15 E / April 2010
The lower part of the display provides information which keys are to be used to load and save
different weekly timer programs.
Independent of the weekly timer, the drying process may always be stopped or
started with the keys . The weekly timer activates or deactivates the
drying process at the next valid switching time.
Loading can be started and stopped with the drying process through the
general weekly timer. The loading process must once be switched on with the
keys at activated drying process to get automatically activated and
deactivated with the drying process.
To Next Page
Loading...