FENDT FAVORIT 900 - B029 - Accelerator Pedal sensor EST (red)

Fav 900
Electric / System in General
B029 - Accelerator Pedal sensor EST (red)
E
Testing
Fav 900 chassis Number 23/3001 and up
24.11.2000
9000 000043
E
a
1/1
Capitel Docu-No.
Index
Date Version
Page
B029 - Accelerator Pedal sensor EST (red)
Text-module
Note:
Connect Adaptor Connector X 899.980.246.205 directly onto Component B029
Ignition "ON".
Text-module
Text-module
+ Supply 8,5 VDC: Fuse Board A013 / Fuse 17
Text-module
Note:
Diagnostic program EDC - Chapter 9000 Reg. B (F.C. 4.1.06)
Description Engine speed Control EDC - Chapter 2710 Reg. A
Calibration 4005 - Chapter 0000 Reg.F (Calibration Accelerator Pedal)
Pin Function
1 Earth
2 + Supply
3 Signal
Test Pin
Reque-
sted Value Condition Possible Failure Origin
Supply 2 8,5 VDC Fuse (17) within A013 or wit-
hin wiring
Earth 1
Signal 3 Approx. 4
VDC ap-
prox.20
mA
Accelerator Pedal not ac-
tuated
Value . 0 VDC: Value: 0 mA:
Failure within Component,
Failure within Wiring ( Earth or
Signal Wire)
Approx.
0,7 VDC
ca. 4 mA
Pedal actuated
Earth 1
measuring Points on EST Control mo-
dule A002 . Pint
Earth 1
Signal 7