FENDT FAVORIT 900 - Manual control modification to standard specification

Fav 900
Engine / Speed control
Manual control modification to standard specification
G
Repair
Repair instructions
16.07.2001
2020 000004
G
1/1
Capitel Docu-No.
Index
Date Version
Page
Manual control modification to standard specification
PM-Picturemodule
Text-module
Bullet-List
● Remove control console
● Rework 6.5 mm x 60 mm groove in accordance with drawing.
● Drill 6 bores of 2.8 mm ø in accordance with drawing.
PM-Picturemodule
Text-module
Bullet-List
● Fit manual control as shown.
EKI 07.01 Schr en
AGCO GmbH & Co.
Johann-Georg-Fendt-Str. 4 D-87616 Marktoberdorf
Serial no. 0401 - 0600
View of control console from rear
PMTAB_Picture
PMTAB_Picture