Fav 900
Engine / Short block
Removing and refitting crankshshaft seal (flywheel).
G
Repair
Fav 900 chassis number 23/3001 and up
15.2.2001
2210 000003
G
a
1/1
Capitel Docu-No.
Index
Date Version
Page
Removing and refitting crankshshaft seal (flywheel).
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Rermoving shaft seal
Remove flywheel.
Lever out sealing ring with special tool.
PMTAB_Picture
Refitting the shaft seal
Apply a thin coat of multi-purpose grease to lips of
new sealing ring.
Fit seal with open side facing the crankshaft using
an expanding mandrel - drive in until properly
aligned.
Refit the flywheel.
To Next Page
Loading...
Need help?
General
