FENDT MAN D 0836 LE - Page 100

Fav 900
Engine / Short block
Removing and refitting con-rod
G
Repair
Fav 900 chassis number 23/3001 and up
21.2.2001
2210 000009
G
a
5/5
Capitel Docu-No.
Index
Date Version
Page
Removing and refitting con-rod
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Measuring the piston projection
Remove the cylinder heads.
Turn relevant piston to TDC.
Position gauge holder with dial on crankcase
sealing face.
Set gauge at "0".
PMTAB_Picture
Carefully move dial gauge holder, lifting the gauge
tip at the same time.
Lower tip onto piston crown and check dial
reading for piston projection.