Contents and general instructions
XII
Festo P.BE-CB-COMP-EN en 1102d
Notes on the use of this manual
This manual refers to the standard designs of the Checkbox
Compact type CHB-C-X with operating system version 3.x.
When the Checkbox is switched on, the version number of the
operating system will be shown briefly (see Chapter 2.5).
The options and parameters available depend on the
operating system, the type of connected Checkbox and on the
factory pre-settings. Customer-specific designs may differ in
technical data, parameter settings and method of functioning.
The pre-setting of the Checkbox can be modified if required
with the software packages CheckKon (function “Modify
system”) or CheckOpti (see Chapter 1.2).
DocumentationontheCheckbox
Information on using the Checkbox can be found in the
following manuals:
Documentation
Contents
Manual for checkbox CHB-C-X
– P.BE-CB-COMP-...
Description of the function,
commissioning, operation and
maintenanc e of the Checkbox.
Manuals on the software packages
– Software CheckKon P.SW-KON
– Software CheckOpti P.SW-OPTI
– Operation of the CheckKon software
– Operation of the CheckOpti software
Tab. 0/1: Documentation on the Checkbox
To Next Page
Loading...
