A. Technical appendix
A-22
Festo P.BE-CB-COMP-EN en 1102d
A.5 Technical data
General
Temperatu re r anges
– Ambient temperature
– Storage temperature
–5 °C ... +45 °C
–20°C...+70°C
Ambient conditions Dry, screened from external light sources,
cleanest possible ambient air
Protection against electric shock
(Protection against direct and indirect contact)
PELV (Protective Extra-Low Voltage)
CE marking (see declaration of conformity) According to EU E MC Directive
1)
Electromagnetic compatibility (EMC)
– Emitted interference
– Resistance to interference
According to EN 61000-6-2
According to EN 61000-6-4 (industry)
Max. permissible I/O signal line length 30 m
Vibration and shock
– Vibration resistance
– Shock resistance
Severity level 2
Severity level 2
Protection c lass ( plug connec tor inser t ed or
provided with protective cap)
IP64
Electrical data
– Nominal operating voltage
– Permissible voltage fluctuations
– Current consumption with loa d-free outputs
– Internal fuse protection
24 V
±15 %
750 mA
8Afuse
Interfaces
– Connection for encoder
–Diagnosticinterface
According to RS 485 specification
RS 232 interface (115 kBaud), socket M12x1,
4-pin
1)
The de vice is intended for use in industrial environments. In residential areas, interference
suppression measures might have to be taken.
Tab. A/14: Technical data: General
To Next Page
Loading...
