Festo Controller CECC-D User Manual

Festo Controller CECC
21
3.6 Operator unit CDPX
The operator unit CDPX is a display for executing and monitoring automation tasks at the field level.
• Note the accompanying user documentation when installing the device.
Figure: CECC with operator unit CDPX
• Connect the CDPX to the CECC directly via the Ethernet interface or indirectly via a switch/hub.
• Make sure that the settings for the subnet mask are the same on both devices (e.g. 255.255.0.0).
Further information can be found in the user documentation for the CDPX.

Festo Controller CECC-D Specifications

General

Brand	Festo
Model	Controller CECC-D
Category	Controller
Language	English