Festo Controller CECC-D - Manually Adding a Device

Festo Controller CECC
26
4.2.4 Manually adding a device
You can also manually add a known device as an alternative to automatic selection.
1. Highlight the local gateway.
2. Click the "Add device..." button.
Figure: "Add device" dialog
3. Enter the name, node address or IP address of the device to be connected in the "Add device" dialog
and confirm your entries by clicking "OK".
Following the update, a list of all CECC-... devices in the local gateway that match the filter settings is
displayed.
Figure: Local gateway with devices