3. Installation
3-13
Festo P.BE-MPA-EN en 1108e
Setting the pressure regulating v alv e (MPA1) wit h the
adjusting screw
Proceed as follow s:
• Turn the adjusting screw 1 (for position see Fig. 3/7) to
set the desired controlled variable (see “Flow diagrams of
the pressure regulator valve plates” in Appendix A).
1 Adjusting screw
1
1
Fig. 3/7: Setting the pressure regulator plates (size MPA1) with the adjusting screw 1
To Next Page
Loading...
