1
32
4 5
6
8
7
5150
3
Dab a small amount of MPA 6000 polish onto the polishing felt
and rub over the surface.
Right of image: stress whitening from sanding plastic edging.
Left of image: edging without stress whitening, reworked with
cloth.
… and remove any polish residues.
Polish the edge …
High-gloss surfaces can also be polished. Attach the polishing
felt to the hand sanding block.
TIP Stress whitening is generated when edging is trimmed.
You can remove the whitening simply by rubbing an offcut of
edging over the affected area while applying slight pressure.
2014_FES_EN_CONTURO.indb 51 11.12.13 11:51
To Next Page
Loading...
