5756
4
4. Information on edging
Edging thickness 0.5–3 mm Edging height 18–65 mm
The CONTURO is capable of processing a wide range of different
edging materials. We recommend using the additional roller
when processing thick or brittle edging. The roller helps process
rigid, thick veneered edging more easily.
More information on the additional roller
Page 29
The CONTURO can affix edging with a height of 18 – 65 mm and
a thickness of 0.5 – 3.0 mm. Use of the edging holder restricts
the maximum edging height to 45 mm and the maximum edging
thickness to 2.0 mm.
The values for particularly brittle or thick edging, or edging with
extreme interior / exterior curves, may deviate from the values
mentioned above. Carrying out tests is the best way to ensure
the correct value.
2014_FES_EN_CONTURO.indb 56 11.12.13 11:51
To Next Page
Loading...
