Festool CONTURO User Manual

9
8
The CONTURO. Basis for the perfect edge.
The CONTURO edge bander allows the simple attachment of edging on anything from rectan-
gular components, to complex free shapes such as curves, radii, convex and concave shapes.
These require a maximum inner radius of 50 mm, and a minimum outer radius of 25
–
30 mm
(depending on the edging mat
erial and thickness).
In combination with a bench unit, the CONTURO also gives you the possibility of attaching edging
to mitred workpieces to a professionally manufactured quality standard. All classic versions of
edging – from wood and plastic to melamine – with a height of 18–65 mm and an edge thickness
of 0.5–3.0 mm can be processed quickly and easily in line with the relevant material.
Versatile and easy to operate, the CONTURO represents a genuine solution for manufacturing
individual shaped parts, as well as affixing edging to workpieces or furniture components produced
in small batches. Packed in a SYSTAINER, the CONTURO is also suitable for mobile use as well
as manufacturing edging in situ with a perfect quality finish. The following pages show examples
of all of these different applications.
2014_FES_EN_CONTURO.indb 9 11.12.13 11:51

Festool CONTURO Specifications

General

Power consumption	1200 W
Edge height	18-65 mm
Edge thickness	0.5-3.0 mm
Melting temperature	100-210 °C
Weight	7.9 kg
Inside radius	> 50 mm
Heating time	8 min
Feed speed	2/4 m/min
Dust extraction connection diameter	27 mm