5.4.4-49 5.4.4-50
5.4.4-51 5.4.4-52
5.4.4-53 5.4.4-54
• Remove the steering wheel from the
machine (see fig. 5.4.5-56).
• Loosen the lower dowels from the
universal joint (see fig. 5.4.5-57).
• Loosen the chain draw dowels (see fig.
5.4.5-58).
• Remove the chain joint (see fig. 5.4.5-59).
• Remove the chain from the steering
column.
• Remove the steering column support
by loosening the screws (see fig. 5.4.5-60).
• Remove the chain tensioner bracket.
• Pull out the steering column from
the lower support (see fig. 5.4.5-61).
• Proceed at reverse to refit the part.
5.4.5-55 5.4.5-56
5.4.5-57 5.4.5-58
5.4.5-59 5.4.5-60
5.4.5-61
5.4.6 Steering Chain
• Put the machine in safe conditions.
• Remove the front carter from the
steering column by loosening the
screws.
• Loosen the screws that secure the
lower support of the steering shaft.
• Loosen the dowels and remove the
chain joint.
• Remove the chain from the sprocket.
• Proceed at reverse to refit the part.
31
To Next Page
Loading...
