FINAPRES Finometer Model-2 - Finometer Model-2 Operation; Using the Control Keypad

Finometer® Model-2 User’s Guide 41
4 Using the control keypad
4.1 Control keys
The keypad of the Main Unit has four keys. These keys have a main
function and a secondary function which depends on the mode
Finometer® Model-2 is in.
Key name Main function Secondary function
START/STOP
• Start a measurement
• Stop, return to Ready Mode
ENTER
PHYSIOCAL
• Switch on/off Physiocal
(physiological calibrations)
when in Run mode (while
performing a measurement)
(PRESSURE UP, during
Steady Pressure Calibration
see 8.4)
MARKER
• Event marker key when in
Run mode
(NEXT CONFIGURATION
ITEM, when the
configuration menu was
entered see 5.4)
HEIGHT
• Perform Height Correction
Unit nulling procedure when
in Ready
mode
• Check runtime information
when in Run mode
(PRESSURE DOWN, during
Steady Pressure Calibration
see 8.4)
MARKER &
PHYSIOCAL
• Go into the configuration
menu, only active in ready
mode (see 5.4)
Table 4.1 Finometer® Model-2 control key functions