Finometer® Model-2 User’s Guide 5
• BeatScope® Easy software: A Microsoft Windows based software
program running on a PC offering a remote monitor screen,
recording functions and remote control of the most important
Finometer® Model-2 device functions. The BeatScope® Easy
software program presents and records waveforms and beat-to-
beat derived data, measured with Finometer® Model-2. The
program CDROM is part of the standard package.
Optional accessories:
• Finger cuff: Sizes: S, M, L.
• Analog I/O unit: Five BNC connectors for four-channels analog
signal output and one-channel analog signal input.
• ECG-module: A three lead ECG module providing an analog ECG
signal which is sampled and stored simultaneously with the blood
pressure waveform.
• BeatScope®: The optional BeatScope® software allows online
monitoring, control, storage and offline review of the complete data
including cardiac parameters.
Packaging:
The Finometer® Model-2 configuration is packed in a specially
developed carton box with spacers to avoid damage during transport.
If the package arrives with external damage please notify Finapres
Medical Systems B.V.
Upon unpacking a quick inspection of proper functioning of the
Finometer® Model-2 device is obtained by following the instructions in
section 1.3 [Quickstart]. Please contact Finapres Medical Systems B.V.
immediately in case of malfunction.
To Next Page
Loading...
